Ferrum FSH Seamer, fully re-manufactured and upgraded.
- Can Feeding Table with Self-activated syncro can feeding worm. This enables to shut out every single seaming head during production.
![](https://www.imetasrl.com/wp-content/uploads/2023/04/1-ILLY-ingresso-barattoli.jpg)
2. Oil seals made by innovative materials and innovative design; they have a better resistance against wear and they are mores efficient against leakage.
![](https://www.imetasrl.com/wp-content/uploads/2023/04/2-ILLY-guarnizioni.jpg)
3. Extremely smooth surface treatment on all casting parts, highly resistant painting performing as a lacquering, in order to reduce coffee sediments as much as possible so the surface will be easier to clean.
![](https://www.imetasrl.com/wp-content/uploads/2023/04/3-ILLY-lisciatura-e-verniciatura-speciali.jpg)
4. Gear driven lifters upgrade of the clinching station, with a fine registration system of the spring pressure, in order to better manage the setting of the clinching.
![](https://www.imetasrl.com/wp-content/uploads/2023/04/4-ILLY-motorizzazione-pre-aggraffatura.jpg)
5. Can Inlet/Discharge main support divided into 3 in order to make any maintenance or setting operation in this part of the machine easier and faster.
![](https://www.imetasrl.com/wp-content/uploads/2023/04/5-ILLY-piastrone-diviso-in-3-parti-scaled.jpg)
6. Sound-absorbing perimetral and upper safety guards to reduce sounds up to 73 decibes at a capacity of 100CPM.
![](https://www.imetasrl.com/wp-content/uploads/2023/04/6-ILLY-protezioni-per-insonorizzazione-scaled.jpg)
7. Special seaming roll levers with micrometric setting system, both axial or radial.
![](https://www.imetasrl.com/wp-content/uploads/2023/04/7-ILLY-registrazione-fine-rolline-aggraffatura.jpg)
8. Upper rotor fully redesigned to match the new seaming rolls with micrometric setting system.
![](https://www.imetasrl.com/wp-content/uploads/2023/04/8-ILLY-rotore-superiore.jpg)